Choosing the correct adhesive for specific bonding materials is critical to ensuring structural integrity, durability, and performance. Different substrates—ranging from metals and glass to various plastics and wood—require specialized adhesive formulations.
Below is a comprehensive guide and reference matrix based on the Adhesive Selection Chart by Substrate for industrial R&D and manufacturing qualification.
Adhesive Selection Reference Matrix
| Bonding Material | Metal | Glass & Ceramic | Wood | ABS / PS | PC / PMMA | PVC |
| Metal | AB Epoxy | UV Adhesive | AB Epoxy | Cyanoacrylate | AB Epoxy | Neoprene Adhesive |
| Glass & Ceramic | AB Epoxy | UV Adhesive | AB Epoxy | AB Epoxy | UV Adhesive | Silicone Sealant |
| Wood | AB Epoxy | AB Epoxy | White Latex Adhesive | PU Adhesive | AB Epoxy | Neoprene Adhesive |
| ABS / PS | Cyanoacrylate | AB Epoxy | PU Adhesive | Cyanoacrylate | Cyanoacrylate | Cyanoacrylate |
| PC / PMMA | AB Epoxy | UV Adhesive | AB Epoxy | Cyanoacrylate | UV Adhesive | PU Adhesive |
| PVC | Neoprene Adhesive | Silicone Sealant | Neoprene Adhesive | Cyanoacrylate | PU Adhesive | Solvent Adhesive |
Substrate-Specific Adhesive Recommendations
To help users and search engines quickly locate specific bonding pairs, here is a detailed breakdown categorized by the primary substrate:
1. Metal Substrates
- Metal to Metal: AB Epoxy
- Metal to Glass & Ceramic: UV Adhesive
- Metal to Wood: AB Epoxy
- Metal to ABS / PS: Cyanoacrylate
- Metal to PC / PMMA: AB Epoxy
- Metal to PVC: Neoprene Adhesive
2. Glass & Ceramic Substrates
- Glass & Ceramic to Metal: AB Epoxy
- Glass & Ceramic to Glass & Ceramic: UV Adhesive
- Glass & Ceramic to Wood: AB Epoxy
- Glass & Ceramic to ABS / PS: AB Epoxy
- Glass & Ceramic to PC / PMMA: UV Adhesive
- Glass & Ceramic to PVC: Silicone Sealant
3. Wood Substrates
- Wood to Metal: AB Epoxy
- Wood to Glass & Ceramic: AB Epoxy
- Wood to Wood: White Latex Adhesive
- Wood to ABS / PS: PU Adhesive
- Wood to PC / PMMA: AB Epoxy
- Wood to PVC: Neoprene Adhesive
4. ABS / PS Plastics
- ABS / PS to Metal: Cyanoacrylate
- ABS / PS to Glass & Ceramic: AB Epoxy
- ABS / PS to Wood: PU Adhesive
- ABS / PS to ABS / PS: Cyanoacrylate
- ABS / PS to PC / PMMA: Cyanoacrylate
- ABS / PS to PVC: Cyanoacrylate
5. PC / PMMA Plastics
- PC / PMMA to Metal: AB Epoxy
- PC / PMMA to Glass & Ceramic: UV Adhesive
- PC / PMMA to Wood: AB Epoxy
- PC / PMMA to ABS / PS: Cyanoacrylate
- PC / PMMA to PC / PMMA: UV Adhesive
- PC / PMMA to PVC: PU Adhesive
6. PVC Substrates
- PVC to Metal: Neoprene Adhesive
- PVC to Glass & Ceramic: Silicone Sealant
- PVC to Wood: Neoprene Adhesive
- PVC to ABS / PS: Cyanoacrylate
- PVC to PC / PMMA: PU Adhesive
- PVC to PVC: Solvent Adhesive
Summary for Quick Reference:
- AB Epoxy is widely versatile for heavy-duty bonds involving metals, glass, ceramics, wood, and rigid plastics like PC/PMMA.
- Cyanoacrylate is ideal for fast-setting plastic (ABS/PS) and multi-material bonding.
- UV Adhesives provide optimal clarity and strength for glass and transparent polymers (PC/PMMA).
Specialized adhesives like White Latex, PU Adhesive, Neoprene Adhesive, Silicone Sealant, and Solvent Adhesives target specific material pairings for maximum durability.
www.jomebond.com – Provider of Industrial Adhesive Solutions
1. Surface Energy Thermodynamics, Wetting Angles & Interfacial Adhesion Mechanisms
Every successful industrial bond begins with spontaneous thermodynamic wetting: the liquid adhesive must possess a surface tension lower than the critical surface energy (γc) of the solid substrate so that the contact angle (θ) drops below 30 degrees and the polymer spreads intimately into microscopic surface roughness. From a materials engineering perspective, industrial substrates divide into three distinct surface-energy regimes that dictate surface preparation and adhesive chemistry selection:
- High-Surface-Energy Substrates (γc = 400 to 5,000 mJ/m² before oxidation; 45 to 200 mJ/m² with native oxide): Carbon steel, stainless steel, aluminum alloys, copper, brass, float glass, and alumina/zirconia ceramics. Once machining oils and rolling lubricants are removed via solvent degreasing or alkaline washing, these surfaces form robust covalent, ionic, or hydrogen bonds with 1K Heat-Curing Structural Epoxies (JOME 1767), 2-Part Epoxy Structural Adhesives, and Anaerobic Retaining Compounds (638).
- Medium-Surface-Energy Polar Engineering Plastics (γc = 36 to 46 mJ/m²): Polycarbonate (PC, 42 mJ/m²), ABS (38–42 mJ/m²), PMMA acrylic (41 mJ/m²), Rigid PVC (39 mJ/m²), Polyamide/Nylon PA66 (42–46 mJ/m²), and PBT/PET polyesters. These substrates bond reliably without chemical primers using 2-Part MMA Acrylic Structural Adhesives, 2K Polyurethane Structural Adhesives (JOMP 2103A/B), or UV-Curable Acrylics, provided internal molding stresses and absorbed moisture (especially in hygroscopic PA66) are controlled.
- Low-Surface-Energy (LSE) Non-Polar Polyolefins & Fluoropolymers (γc = 18 to 31 mJ/m²): Polypropylene (PP, 29 mJ/m²), Polyethylene (HDPE/LDPE, 31 mJ/m²), Polyoxymethylene (POM/Acetal, 36 mJ/m² but highly crystalline), Silicone rubber (PDMS, 24 mJ/m²), and PTFE (18 mJ/m²). Standard epoxies bead up on LSE plastics; reliable bonding requires either JOM 770 Polyolefin Primer activation, atmospheric plasma/corona treatment to raise γc above 44 mJ/m², or specialized silane-modified / RTV silicone systems.
2. Coefficient of Thermal Expansion (CTE) Mismatch & Bond-Line Strain Calculation
When joining dissimilar materials—such as bonding an aluminum heat sink (CTE ≈ 23 × 10-6 /K) to an FR4 PCB (CTE ≈ 14 × 10-6 /K) or a polycarbonate lens housing (CTE ≈ 65 × 10-6 /K) across a 200 mm span—a temperature excursion from -40°C to +105°C (ΔT = 145 K) generates a differential linear expansion of ΔL = L · (α1 – α2) · ΔT = 200 mm × (65 – 23) × 10-6 × 145 = 1.218 mm. If the bond line is filled with a brittle, thin-bond-line adhesive (0.05 mm thickness, elongation < 3%), the shear strain exceeds 2,400% and fractures either the substrate or the interface. To prevent thermal-cycle delamination:
- Specify an elastomeric or toughened structural adhesive with elongation at break matching the calculated shear strain—such as 1K SMP Hybrid Structural Adhesive (MS Polymer, Elongation >250%) or JOMP 2103A/B 2K Polyurethane.
- Maintain a controlled minimum bond-line thickness (BLT of 0.25 mm to 0.80 mm) using glass microbeads or molded standoffs so the adhesive layer can deform in shear without exceeding its elastic limit.
3. Master Substrate-to-JOME Product Cross-Reference Matrix
| Primary Substrate Pair | Surface Energy / Prep Protocol | Primary JOME Structural / Assembly Grade | Alternative High-Elasticity / Fast-Cure Grade | Target Lap-Shear / Peel Performance |
|---|---|---|---|---|
| Steel / Stainless / Aluminum to Metal | High (IPA degrease + 80–120 grit abrasion) | JOME 1767 1K Heat-Cure Epoxy / 2-Part High-Strength Epoxy | 2-Part MMA Structural Acrylic | 18–25 MPa lap shear (ASTM D1002); -50°C to +180°C |
| Cylindrical Shafts, Bearings & Threaded Fasteners | Active/Passive Metal (JOM 755 degreaser) | 638 Cylindrical Retaining Compound | 263 / 277 Anaerobic Threadlocker | 20–28 MPa axial push-out; 100% metal-to-metal contact |
| Glass / Quartz to Metal or Ceramic | High (Clean dry surface; silane wipe optional) | GM 3233 Shadowless UV Glass-Metal Glue | JM 352 Optical Positioning UV Resin | 3–8 sec UV fixture; >98% transmittance; low shrinkage |
| ABS / PC / PMMA / PA / FRP Composites | Medium Polar (IPA wipe; avoid ketone solvents) | JOMP 2103A/B 2K Polyurethane | UV Rapid Fixation Structural Adhesive | Substrate-failure bond strength; zero stress cracking |
| PP / PE / POM / EPDM / Silicone Rubber | Low LSE (<31 dynes/cm; prime or plasma treat) | JOM 770 Polyolefin Primer + Cyanoacrylate | 1K RTV Silicone Sealant / SMP Hybrid MS Adhesive | Cohesive rubber tear; 200%–400% flexible elongation |
4. Deep-Dive Companion Guides by Material Family
This overview serves as the master index for our 5-part substrate engineering series. For detailed surface chemistry protocols, joint geometry rules, and curing profiles on specific material groups, proceed directly to the companion guides below:
- The Definitive Industrial Adhesive Selection Guide by Substrate (10 Materials Matrix)
- Hard Materials Adhesive Selection Guide: Metal, Glass & Ceramic, and Wood
- Plastic-to-Plastic Adhesive Selection Guide (Part 1): Engineering Thermoplastics & Polarity Matching
- Plastic-to-Plastic Adhesive Selection Guide (Part 2): Swelling Mechanism, PP/PE Primer & Polyolefin Protocol
- Soft Materials & Hard-to-Bond Materials Guide: Rubber, Leather, Fabric, and Paper
- Identity Card of 9 Industrial Adhesives: Properties, Strengths, Weaknesses & Selection Guide
5. Accelerated Environmental Aging & ASTM / ISO Qualification Standards by Substrate Class
Before releasing a multi-substrate structural or sealing joint to mass production, quality assurance engineers must validate interfacial durability across accelerated environmental conditioning cycles that replicate 10 to 15 years of field service. Because differential moisture absorption, oxide hydration, and plasticizer migration occur slowly at room temperature, relying solely on 24-hour dry lap-shear numbers frequently masks latent delamination risks. JOME’s application engineering laboratory recommends pairing each substrate family with its corresponding international test protocol:
- Metal-to-Metal & Metal-to-Composite Structural Joints (ASTM D1002 / ISO 4587): Measure overlap shear strength on 25.4 mm × 12.7 mm lap coupons at -40°C, +23°C, and +120°C both initially and after 1,000 hours of neutral salt-spray exposure (ASTM B117) and 1,000 thermal shock cycles (-40°C to +125°C, 30-minute dwell).
- Glass, Optical & Electronic Enclosures (IEC 60068-2-78 Damp Heat): Expose bonded glass-to-metal or PC-to-aluminum assemblies to 85°C / 85% relative humidity for 1,000 hours, verifying ≥80% shear retention, zero interfacial blistering, and zero optical haze increase.
- Elastomer, Gasket & Flexible Polymer Joints (ASTM D1876 T-Peel & ASTM D412): Verify that peel failure remains 100% cohesive within the rubber or foam substrate rather than stripping cleanly from the primed or plasma-activated interface after heat aging at 70°C–100°C for 168 hours.
Frequently Asked Engineering Questions
How does substrate surface energy determine whether a primer or plasma treatment is required?
Substrates with surface energy above 38 dynes/cm such as metals, glass, and ABS wet out readily with structural epoxies and acrylics, whereas low-surface-energy polyolefins (PP, PE, PTFE below 31 dynes/cm) require JOM 770 polyolefin primer or corona activation.
Which JOME adhesive chemistry handles dissimilar substrates with large thermal expansion mismatches?
For metal-to-plastic or glass-to-aluminum assemblies with high CTE mismatch, JOME recommends two-component MMA structural acrylic (JOMA 9138), 2K polyurethane (JOMP 2103A/B), or elastic SMP hybrid adhesive (JOMH 5560).
