Single-component epoxy resin sealant

JOME 1767 single component epoxy resin adhesive

 product description

JOME 1767 is a solvent-free one-component epoxy structural adhesive. This product boasts excellent toughness and impact strength. When fully cured through heat, it delivers outstanding bonding performance, electrical conductivity, moisture resistance, and mechanical properties. It demonstrates high adhesion strength to most substrates including glass, metal, and ceramic materials, while meeting stringent requirements for high-temperature bonding and mechanical performance. Widely used in automotive electronics, pressure sensors, wiring harnesses, motor magnet bonding, and inductor fixation applications.

Solidify the technical parameters before and after

Note: 1. The data in the table is the measured data under a certain condition for reference only, and it is not guaranteed that the data obtained by customers in the actual use process can be completely consistent with it.

2.Solidification process: 120℃/1h.

Application techniques

If the epoxy is stored in a frozen environment, it should be taken out to room temperature before use. During application, avoid exposing the glue to high temperatures to reduce its viscosity, unless tested and proven to be feasible.

Apply the adhesive directly to the surface of the object to be bonded that has been degreased, rusted and roughened. Select appropriate tools to assist in applying the adhesive and fix it with a fixture. Then cure it according to the recommended heating conditions.

matters need attention

As this product is a chemical product that will react when heated, the environmental temperature has a great impact on the quality of the product. Please keep the product in a low temperature environment to ensure the stability and quality of the product. If the colloid is not used up after taking it out, please seal it tightly and put it back into the freezer for preservation.

A small number of people who have been exposed to the glue for a long time will have mild skin allergies, with mild itching and pain. It is recommended to wear protective gloves when using it. If it sticks to the skin, wipe it off with acetone or alcohol, and wash it clean with detergent.

Before using it in large quantities, try it out in small amounts to master the use of the product and avoid mistakes.

 packing specifications

20kg/ plastic barrel, 4kg/ iron barrel, 1kg/ plastic can

30ml per dose in a syringe

Storage and transportation

The storage period of this product is 6 months (<0℃ freezer)

This type of product is non-hazardous and can be transported as a general chemical