Single-component RTV silicone sealant (black, white, gray, red)-OEM

FEATURES

• JOMS 5339is a one-component, non-corrosive silicone adhesive sealant that cures on exposure by moisture to form an elastic silicone rubber.
• JOMS 5339is none-flowable and has excellent corrosion-free adhesion to metals, including copper, plastics, ceramics, glass, etc, without the use of primers.
• Excellent high and low temperature resistance: from –60℃to 300℃ .
• Excellent weather ability, water and chemical resistance
• Excellent electrical insulationproperties
•   Simpleandeasy-to-use one-component system

Excellent mechanicalproperties

TYPICAL UNCURED PROPERTIES

TYPICAL CURED PROPERTIES (7 DAYS @ 25℃/55％RH)

USE

1. Clean the surface thoroughly, keep dry and loose debris。Clean with a solvent.
2.  Cut the tip off cartridge and attach nozzle to cartridge. Full the joint completely.
3.   Sealant  skins  in10  minutes,is  touched  dry  in  15  minutes  and  cures  in  1-2  days depending on application.
4. Fullly bond strength isachievedin 7 days.

How to apply

Apply a bead of JOMS 5339 Adhesive/Sealant (see Handling Precautions) to one of the prepared surfaces, then quickly cover with

the other substrate to be bonded.

Exposing at moisture, the freshly applied material will “skin-over” in about 10 minutes at room temperature and 50% relative humidity.

Any tooling should be completed before this skin forms. The surface is easily tooled with a spatula.

Cure time

After skin formation, curing continues inward from the surface. In 24 hours (at room temperature and 50% relative humidity) JOMS 5339 Adhesive/Sealant will cure to a depthof about 4mm. Very deep sections, especially when access to atmospheric moisture is

restricted, will take longer to cure completely. Cure time is extended at lower humidity levels. Before handling and packaging

bonded components, users are advised to wait a sufficiently long time to ensure that the integrity of the adhesive seal is not

affected. This will depend on many factors and should be determined by the user for each specific application.

HANDLING PRECAUTIONS

When using solvents avoid contact with skin and eyes, heat, sparks and open flames. Always provide adequate ventilation. Obtain

and follow handling precautions from the solvent supplier.

Product safety information required for safe use is not included. Before handling, read product and safety datasheets and container

labels for safe use, physical and health hazard information. You can obtain a copy from your local sales representative or

Distributor.

USABLE LIFE AND STORAGE

When stored at or below 300C (860F) inthe original unopened containers, this product has a usable life of 12 months from the date

of production. And best to use off in 9 months. If expired, please test the skin off time first.

PURCHASE CODE

√、JOMS 5339W silicone sealant

1. code:0003200, 300ml/tube, 25tubes/box;

√、JOMS 5339G silicone sealant

iii.  code:0003180, 300ml/tube, 25tubes/box;

√、JOMS 5339GB Gray–Black silicone sealant

1.   code:0003160, 300ml/tube, 25tubes/box;
2. code:0003200, 2600ml/tube, 6tubes/box;
3. code:0003180, 2600ml/tube, 6tubes/box;
4. code:0003160, 2600ml/tube, 6tubes/box;

LIMITATIONS

Adhesion may be less successful on low-energy plastics such as Polyethylene, Polypropylene and PTFE. Users should do

preliminary tests in each specific application to ensure satisfactory results.