
JOME is an adhesive manufacturer and adhesive supplier producing industrial adhesives in its own factory. Building a robot assembly? Send us the materials, joint drawing and assembly process to start discussing samples.
Where adhesives fit into robot manufacturing
A robot adhesive manufacturer needs to understand what each joint does before discussing a material. Why ask the same adhesive to lock a screw, protect a sensor and transfer heat? Separate those duties when preparing your enquiry, including which parts must remain accessible during maintenance.
- Gear housings and motor fasteners: assess anaerobic threadlocking for metal threads, with removal requirements and surface finish included in the selection.
- Bearing seats and shaft sleeves: assess retaining compounds against the actual metal fit, clearance and load path. Keep adhesive away from moving bearing surfaces.
- Covers, brackets and sensor mounts: consider structural bonding where the joint design permits it. Check alignment, loading and the effect of coatings on adhesion.
- Controller and sensor electronics: compare encapsulation approaches for the required protection while leaving connectors, vents and sensing areas clear.
- Power electronics and heat sinks: evaluate a thermal interface separately from housing sealing or component fixing.
- Cable entries and enclosure seams: consider flexible sealing alongside cable movement, flange condition and future access.
For an adhesive manufacturer, the surface that touches the adhesive matters as much as the component name. Record whether that surface is bare metal, a coating, a moulded plastic or a composite. Include any release agent, machining oil or cleaning residue that could remain before bonding.
Compare adhesive families by assembly duty
Your adhesive manufacturer should compare candidate formulations against the joint requirements, rather than treat a chemistry name as a performance result. A robot contains both rigid assemblies and moving interfaces. The following comparison is a starting point for trials on your own parts.
| Material family | Selection question |
|---|---|
| Epoxy | For bonding or encapsulation, how do cured stiffness, cure conditions and heat generated during cure affect the assembly? |
| Silicone | Where flexibility matters, does the selected formulation adhere to the finished surfaces and suit nearby electronics? |
| Polyurethane (PU) | Does the formulation provide the required flexibility, and can the production process control its mixing and moisture requirements? |
| Anaerobic adhesive | Do the metal surfaces and confined joint support the specified cure, and can the joint be dismantled as required? |
| Thermally conductive adhesive | Does the installed bond line provide suitable contact across the real interface while meeting the bonding requirement? |
Keep protection, heat transfer and repair access separate
Ask an adhesive manufacturer about potting and encapsulating compounds when an electronic assembly needs surrounding protection. Decide which components can be embedded and which must remain replaceable. Check filling paths, trapped air and curing effects on sensitive components in a representative assembly.
With an adhesive manufacturer, review thermally conductive adhesives around the complete heat path. Surface contact, interface thickness and air pockets all belong in the trial. Compare operating temperatures under the same load and assembly conditions; a material description alone cannot establish the thermal performance of the robot.
Build the bonding step into the production sequence
Bring your adhesive manufacturer into the process discussion before freezing the dispensing step. Explain when the parts are cleaned, positioned, bonded and moved onward. A joint that looks satisfactory on a loose sample still needs checking after installation, cable routing and the intended operating movements.
- Prepare: use a cleaning and surface preparation method compatible with the substrates and selected adhesive.
- Dispense: control the deposit location and amount, keeping lubricant paths, connectors and sensing surfaces clear.
- Assemble and cure: maintain alignment and follow the selected formulation’s mixing, handling and cure instructions.
- Evaluate: check the joint and robot functions after representative vibration, movement and environmental exposure. Include the planned repair procedure.
Start with samples and a documented trial
Working with an adhesive manufacturer starts with a clear application brief. JOME offers free samples and a technical data sheet (TDS). Share the mating materials, surface treatment, joint shape, dispensing method and service conditions. Review the proposed material information before deciding how to run the sample trial.
An adhesive manufacturer also needs useful trial feedback. Record where the bond separates, whether filling leaves voids and whether the assembly remains serviceable. If a catalogue option does not fit the application, discuss a custom formulation around the specific mismatch, such as flow, flexibility or handling requirements, rather than an undefined request for stronger glue.
Discuss your robot assembly with an adhesive manufacturer
Choose an adhesive manufacturer by how well the proposed material and process address your joint. Send JOME a drawing or component photos with the assembly requirements, then use samples to assess the candidate on the real surfaces before adopting it in production.
Continue your adhesive manufacturer enquiry with MS polymer adhesive selection and the structural adhesive range. Visit the Shanghai JOME Industrial homepage, or send your robot assembly requirements to the JOME technical team.
Verified JOME Engineering Grades & Specification Cross-Reference
To qualify an industrial-grade adhesive, potting compound, or thermal interface material for this application, compare verified Shanghai Jome Industrial Co., Ltd. (JOME) formulations below or explore our primary category hubs: Anaerobic Threadlockers & Retaining Adhesives and Industrial Structural Adhesives.
| JOME Grade / SKU | Polymer Chemistry & Cure | Key Verified Specification | Primary Industrial Application |
|---|---|---|---|
| JOM 3107 | Anaerobic Magnet Structural Bonding Adhesive | High impact & centrifugal shear (>20 MPa) | +150°C rated | Servo motor, traction motor & humanoid robot rotor magnet bonding |
| JOME 1767 / JOME 2029A/B | 1K Heat-Cure & 2K High-Temp Motor Epoxy | Continuous service up to +180–200°C | High Tg & chemical resistance | High-speed turbine rotors, rare-earth & ferrite magnet bonding |
| JOM 638 | High-Strength Cylindrical Bearing Retaining Compound | Fills 0.05–0.25 mm radial clearances | Prevents fretting wear | Motor shafts, harmonic drive bearings, gears, bushings & sleeves |
| JOM 263/277 & JOM 204/93 | Liquid Anaerobic & Microcapsule Pre-Coated Threadlockers | Breakaway torque 20–42 N·m | Oil-tolerant & dry-to-touch film | Chassis bolts, robot joint fasteners, mass pre-coated screws |
Interactive Engineering Tools: Master Substrate & Thermal Cross-Reference Chart · Potting Volume, Mix Ratio & ΔT Calculator · Industrial Adhesive Manufacturer Comparison
Need Technical Data Sheets (TDS) or Trial Samples for Line Qualification?
Share your substrate pair, operating temperature, or target cycle time—only Email and Application / Part Code are required. Our R&D engineers reply within 24 hours.
–Request free sample
-Speak with our material engineer
WhatsApp +86 18918756805
Matched JOME Industrial Formulations: For production bonding, potting, and sealing qualification in this application, evaluate General-purpose epoxy potting compound (black, white, red, clear), 10:1 Condensation type high bonding strength silicone potting compound, Thermal conductive single-component RTV silicone adhesive(0.82W and 1.5W), and Thermal conductive single-component RTV silicone adhesive(2.85W ) (ISO 9001:2015 and CTI RoHS 2.0 verified; free engineering samples shipped via UPS freight collect).
Sub-Assembly Engineering Breakdown: Joint Actuators, End-Effectors & Compute Bays
Modern 6-axis collaborative arms, autonomous mobile robots (AMRs), and bipedal humanoid platforms concentrate high torque density and rapid thermal transients into thin-walled magnesium, 7075-T6 aluminum, and carbon-fiber housings. Unlike stationary factory cabinets where mechanical brackets carry structural loads independently, robotic joints experience continuous bidirectional shock, micro-fretting at bearing races, and localized stator winding spikes above 130°C. Specifying a cohesive multi-chemistry bonding architecture eliminates resonant loosening while trimming dead weight across the kinematic chain.
When qualifying NdFeB rotor magnet adhesives and low-temperature 1K epoxies for frameless torque motors, process engineers must protect temperature-sensitive N48SH/N52H magnet grades against thermal demagnetization during oven curing. Curing JOME 3665 low-temperature heat-curing 1K epoxy below magnet critical thresholds—or fixturing at ambient temperature with JOM 3107 anaerobic magnet structural adhesive—maintains full magnetic flux density while resisting rotor radial fling forces.
| Robotic Sub-Assembly | Primary Mechanical / Thermal Stress | Matched JOME Grade & Chemistry | Key Process & Reliability Advantage |
|---|---|---|---|
| Frameless Joint Motor Stator | I²R copper heat buildup & PWM slot corona | JOME 3113 A/B (1.2 W/m·K 2K Epoxy) | Low CTE, rigid slot fill, radial heat transfer to aluminum shell |
| Harmonic Drive Cross-Roller Bearing | Reversing micro-slip & radial fretting corrosion | JOM 638 Cylindrical Retaining Compound | 100% metal-to-metal contact area, eliminates press-fit ovality distortion |
| Sub-2 kWh Torso Battery Pack | Cell-to-frame shock + thermal runaway isolation | JOMP 2650 A/B (1.3 W/m·K 2K PU Structural) | Room-temperature cure, high peel toughness on aluminum cooling plates |
| 3D Vision / Depth Camera Window | Optical alignment shift (<5 μm) & IP67 washdown | JM 2081 Cationic UV Epoxy + JM 3302 CIPG Gasket | Ultra-low volumetric shrinkage plus shadowed-flange moisture cure |
| Edge AI SoC & Servo Drive PCB | Multi-height MOSFET/inductor thermal impedance | TCMP 140# (14 W/m·K 1K Thermal Gel) | Zero assembly compression spike on delicate BGA solder balls |
| Geomet / Anodized Housing Screws | High-frequency actuator vibration loosening | JOM 204 Dry-to-Touch Pre-Coated Threadlocker | Dry pre-applied patch ready for high-speed robotic screwdriver feeders |
Dispensing Automation, Cure Cycle Integration & Incoming Batch Control
Scaling from prototype bench builds to automated robotic assembly cells requires synchronizing cure mechanisms with takt times. Liquid anaerobic threadlockers sometimes migrate onto adjacent polycarbonate covers and induce environmental stress cracking; switching to dry pre-applied microcapsule threadlocker 204 on automated fasteners removes wet dispensing stations from final assembly altogether. Similarly, in compact torso battery modules—as detailed in our breakdown of why a few grams of battery adhesive govern sub-2 kWh humanoid robot packs—two-component static-mixer dispensing of 2K thermal polyurethane structural adhesives achieves repeatable bead geometry without oven heating lithium-ion cells.
For articulated cable harnesses, elastomer bellows, and O-ring dynamic seals exposed to continuous flexing, engineers also pair structural bonding with high-temperature dielectric silicone lubricating grease (-55°C to +200°C) to prevent EPDM and silicone seal stick-slip wear. Every JOME robotics batch is manufactured in Shanghai under ISO 9001:2015 (Cert. 86724Q10331R0S) and ISO 14001:2015 (Cert. 86724E10332R0S), supported by 11 CTI RoHS 2.0 test reports (A2260902964101001 through A2260902964112001). Contact our engineering desk via our RFQ & sample portal to request matched cartridges or syringes via UPS freight collect.
For rotary shaft O-rings, pneumatic gripper seals, and flex-harness boots across robotic cells, specify Lubricating Grease (JOME -55°C to +200°C dielectric silicone grease) to eliminate EPDM seal swelling.
Frequently Asked Engineering Questions
Which adhesives prevent magnet debonding and stator hot spots inside compact robot joint motors?
Robot actuator builders pair JOM 3107 magnetically bonded anaerobic structural adhesive or JOME 3665 low-temperature 1K heat-cure epoxy on rotor magnets with JOME 3113 A/B (1.2 W/m-K) epoxy or JOMS 5230-15 (1.5 W/m-K) silicone potting on stator windings.
How do assembly engineers lock harmonic drive bearings and zinc-flake fasteners against reversing torque?
Cylindrical bearing sleeves and spline bushings are secured with JOM 638 high-strength retaining compound, while M2 to M8 housing screws use JOM 204 pre-coated microcapsule threadlocker or JOM 263/277 liquid anaerobic threadlocker.
Are JOME robotics adhesives backed by third-party RoHS 2.0 laboratory reports and free trial samples?
Yes. All core epoxy, silicone, polyurethane, UV, and anaerobic grades from Shanghai Jome Industrial Co., Ltd. carry ISO 9001:2015, ISO 14001:2015, and 11 CTI RoHS 2.0 (EU 2015/863) reports, with free evaluation samples shipped via UPS freight collect.
Related Industrial Adhesive Products & Engineering Guides
thermal conductive silicone grease(0.5-10 W/m.K ) · High bonding strength Optical transparent UV adhesive · 2-part Acrylic Structural Bonding Adhesive(MMA) · Metal, magnetically bonded Anaerobic Structural Adhesive · 2K Thermal conductive epoxy potting compound(1.5W) · UV-curable epoxy-based adhesive · 263 、277 Thread Locking Adhesive Prevents Bolts From Coming Loose · Thermal Conductive Polyurethane Potting Compound (1.3W) · Thermal conductive single-component RTV silicone adhesive(2.85W ) · High resilience UV glue replaces silicone rubber sealing ring · Clear self-repairing encapsulating silicone gel · Single-component low-temperature heat-curing epoxy structural adhesive · Temporary shielding material – Removable UV blue adhesive · Two-component paste-shaped thermal conductive silicone gel (8.0 W/mK) · SMT Red Glue & Surface Mount Epoxy Adhesive: Dot Profile, Slump Resistance & Wave Soldering Reliability · Epoxy Resin vs Polyurethane vs Acrylic vs Silicone Structural Adhesive: A Comparative Table of Main Types and Characteristics of Structural Bonding Adhesives · Can epoxy adhesive still cure in winter? · Industrial Adhesive, Potting Compound & Sealant Specification Chart: Substrate, Thermal Conductivity, Viscosity & Cure Cross-Reference
