UV light-curing rapid fixation structural adhesive
GM3233 light hardening resin, curing process has a low shrinkage rate, resin light hardening process does not produce displacement phenomenon, especially used in iron, aluminum… and other metal materials and glass then fixed. This product belongs to the high viscosity is not vertical flow of shaking colloid has the characteristics of low shrinkage rate, is very suitable for reading and writing precision optical parts of the point glue fixation, hardening process gas volatilization is very low, does not pollute the product parts.
product details
Product introduction
| model | GM3233 |
| Chemical type | acrylics |
| Solidification type | ultraviolet light polymerization |
| component | monocomponent |
| Design purpose | Glass-metal bonding |
| design feature:
It has adhesion to glass, metal, PCB and other materials. Fast curing speed. The coating is tough and stable. Good liquidity, easy to glue. The gel is mild and has low irritation. |
|
Solidification parameters before curing
| surface | black liquor |
| dynamic viscosity | 1900±300 mPa·s
Electronic viscometer, 3#12@25℃ |
| density | 1.05±0.05g/cm³ |
| Solvent content | 0% |
Solidification conditions and properties after solidification
| 1KW mercury lamp | The thickness of the glue is 1mm, and the energy for complete curing is 800-1000mj/cm² |
| 365nmLED | The thickness of the glue is 1mm, and the energy for complete curing is 3000-6000mj/cm² |
| hardness | 70±3D |
| bonding strength | Base material AL/GLASS—6.4N/CM2Base material PC/GLASS—5.5N/CM2 |
| bulk resistor | 8.3×1012 |
Thermal resistance test
| base material | test condition | Bond strength retention |
| GLASS/METAL | 100℃（48h） | 80% |
| GLASS/METAL | 65℃90%RH（72h） | 65% |
Storage requirements
This product is sensitive to light. Exposure to natural and artificial light sources should be avoided as far as possible during storage and use. The package should be sealed in time after opening.
Do not pour the glue out of the original package again, so as not to pollute the glue.
Best storage temperature: 8-28℃.
Shelf life: 12 months.
packing specifications
30cc, 50cc syringes
1L plastic container
Packaging can be provided based on user requirements
For Immediate Assistance, Please Contact us Now!
Contact Us
- 24-hour online service
- Own factory processing