radar
Adhesive demand
Silicone/Soft Polyurethane
-40/100, Thermal Shock
Dual 85/Dual 95
PUR 1670
No toxicity; reduces the risk of non-curing.
Enhance the bonding strength of the housing
Customers: Tiejunjiang, Haoen, Shangfu, Audiwei, Huitong Xidian, Xiamen Tongzhi, Shengtaike
competitor
WEVO PD4
Corning EE1100
ladar
Glass and housing PC bonding
SIPC 1832
1:1 Silicone Adhesive and Sealant
Fast-curing rapid air-tightness test
Temperature resistance: -60/200°C
client
Hans Laser, Bosch, Zhonghaida, Hesai, Wan an Technology, Huawei, Faliao
Tire Pressure Sensor
PA66 housing encapsulation
Vibration resistance and weather resistance
Low impact on RF performance (low dielectric constant)
Temperature range: -40°C to 85°C
SIPC 9030 – Single-component silicone gel
Single-component application is simple.
SIPA 8715
1:1 ratio, low hardness, provides adhesion to the housing
Excellent mechanical properties and high toughness
PUR 1618
Low viscosity – 85A, V0
Operating temperature: -50/150°C
client
Baolong Huo Fu, Xiamen Tongzhi, Serte, Zhongshan Aoduo
Car antenna
Internal coil encapsulation
Coil encapsulation and housing bonding
Temperature resistance: -40°C to 125°C
SIPA 9333B
Low dielectric constant, hardness A35
PUR 1670
100:33， A65，
Low dielectric constant; be mindful of moisture during curing.
door handle
Door handle housing encapsulation
Boiling test – 22 days
85/85 1000h
PUR 1670
Plastic housing bonding reinforcement
High-temperature and high-humidity resistance
low permittivity
client
Jiamei, Yundong, Guangzhi Huigao, Huayi
Eddy current sensor
rotary transformer
Housing internal potting
Temperature resistance: up to 150°C; oil resistance
EP 1715AB Epoxy Resin
1:1 two-component
Flexible, low-hardness A20
Low viscosity: 600 mPa·s
client
United Microelectronics Corporation (UMC)
Foot pedal switch sensor
Foot pedal switch sensor
PCB and PBT housing encapsulation protection
Long-term temperature resistance ranging from-40°C to 85°C; excellent adhesion to the housing.
BaiGao Model:
SIPA 8130
6:1 dual-component silicone rubber; A40 – temperature resistance: 150°C
EP 1713
100:8 Dual-component Epoxy Resin
High-temperature resistance: 180°C
Thermal conductivity: 1.0 W
Pressure sensor
Low-stress potting compound
Gel filling and housing sealing
Sealing protection, waterproofing, and resistance to thermal shock
Temperature resistance: -40°C to 125°C
SIGEL 8606
No primer required – excellent adhesion.
Penetration Number: 70
Temperature resistance: -60–200°C
low stress
EP 6688-30# Housing Bonding
Single-component epoxy thermosetting
client
Tianbo, Baolong
Light Rainfall Sensor
PCB surface potting
Surface encapsulation
Long-term temperature resistance: -40°C to 85°C
High adhesion to the housing
Excellent light transmittance, resistance to yellowing, and repairable
SIGEL 8603
Optical-grade two-component silicone gel
Viscosity: 6000 mPa·s
Low hardness: 00–52
rotation direction sensor
PCB circuit board triple protection
PCB circuit board triple protection coating
Waterproofing and moisture resistance; shock absorption and insulation
Becoat 9060/9061/9001
Transparent silicone-coated adhesive
Solvent-free; solid content: 100%
High liquidity, facilitating trading
Suitable for shallow potting applications.
Temperature range: -40°C to 280°C
angular transducer
Use adhesive dots
Housing sealing; PCB bonding.
Temperature resistance: -40°C to 125°C
recommend products
PUR 6608
100:16 – Low-viscosity potting compound
Excellent adhesion
EP 6113
100:8 dual-component formulation; low CTE = 20; thermal conductivity = 1.0 W/(m·K); viscosity = 2000 cPs; long-term operating temperature range: 150–180°C
