A thermal-gelling solution for AI servers in computing power centers. Let’s find out exactly where the adhesive is used inside the servers and what type of adhesive is being used.
I decided not to consult any documentation and simply start disassembling the unit. To be honest, the moment I opened the lid, I was quite taken aback. In a machine costing tens of thousands of yuan, the most densely packed components inside are not the chips, but various colored adhesives and thermal conductive materials. From the CPU to the power supply, and from the RF module to the liquid-cooling interface, I took notes as I went through each component. This article follows the sequence in which I disassembled the unit. Following this guide step by step will be more effective than reading ten component-selection guides.
First Stop: Thermal Paste on the CPU

This image was generated by AI. After removing the heatsink, the thermal paste on the CPU top cover is still present. The condition is good, with no dry cracking at the edges, indicating that the oil stability of the paste used in this machine is well-managed. Here is a piece of lesser-known knowledge: a higher thermal conductivity does not necessarily mean more stable performance. What truly determines lifespan is oil stability and volatility. Thermal pastes with high oil stability will leak after one or two years; the paste dries out, the interfacial thermal resistance spikes, and CPU temperatures can be seven to eight degrees higher than those of a brand-new machine. On the market, the mainstream thermal pastes come from major Japanese and American manufacturers like Shin-Etsu and Taohsi; one has a background in semiconductor materials, while the other is backed by the Dow silicone system, both with over two to three decades of technical accumulation. Domestic brands have kept pace rapidly in recent years, achieving comparable thermal conductivities; the gap now mainly lies in long-term validation data. Honeywell takes a different approach; they focus on phase-change materials, which are most widely used in AI server GPUs, representing another selection strategy. First recommendation when disassembling a machine: don’t just look at thermal conductivity when choosing thermal paste; oil stability and volatility are even more critical.
Stop 2: Potting compound for the power supply module

This image was generated by AI. Once the power supply housing is opened, a completely different scene unfolds: inductors, transformers, and MOSFETs are all tightly sealed inside by a layer of gray potting compound. This is thermal conductive potting compound, a standard procedure for server power supplies. Since power devices generate heat in concentrated areas, the potting compound is used to conduct that heat outward while simultaneously providing electrical insulation and flame retardancy. The market leaders in potting compounds are also the same few companies: Taoxi’s Sylgard series is a long-standing industry veteran, while Henkel represents another major player, boasting a comprehensive product line and full certification. In this context, domestic manufacturers have actually made significant inroads because potting compound processes are mature and there are numerous formulation options; domestic suppliers have clear advantages in cost-effectiveness and delivery speed, and the localization rate for data centers is already very high. Second recommendation for system disassembly: evaluate potting compounds based on three key metrics—thermal conductivity, flame retardancy, and electrical insulation; the absence of any one of these creates a potential risk.
Stop 3: Thermal Conductive Gel for RF Modules

This image was generated by AI. Near the RF module of the communication board, there is a layer of translucent gel-like material that feels slightly elastic when pressed. This is thermal conductive gel, specifically designed to address “gap” issues. There are always irregular gaps between the RF module and the shield; silicone grease cannot fill them all, and gaskets do not always fit perfectly—only gel can be squeezed into these spaces while providing cushioning. In the gel market, Parker and Laird are traditional industry leaders; Parker even launched a new product with an extremely high thermal conductivity two years ago, which represents the pinnacle of this category. Taoxi and Henkel also have mature product lines. The hidden cost of gel lies in its evaporation rate: volatiles can contaminate optical paths and circuits, which is the primary concern for data centers; therefore, when selecting a product, a low evaporation ratio and high thermal conductivity are more critical than other factors.Recommendation #3 for system disassembly: evaluate thermal gel based on its evaporation rate, as volatiles can contaminate optical paths and circuits, which is the biggest concern for data centers.
Stop 4: Structural adhesive for the heat sink

This image was generated by AI. Isolated thermal plates, heat sinks, and fan brackets are secured using structural adhesives. Note that the adhesives used here are different from those mentioned previously. The thermal paste and gels used earlier are designed solely for heat conduction and do not provide structural support; structural adhesives, however, are intended to provide a “bond” and must withstand vibration and temperature fluctuations. For bonding where heat conduction is required, choose a thermal conductive adhesive; for bonding where heat conduction is not required, choose a high-strength structural adhesive—do not mix them. Henkel and 3M are industry benchmarks in this field; 3M’s VHB foam tape has even replaced screws in some applications. Recommendation #4 for system disassembly: For bonding requiring heat conduction, choose a thermal conductive adhesive; for bonding without heat conduction requirements, choose a high-strength structural adhesive. A higher thermal conductivity is not necessarily better; excessive fillers make the adhesive brittle, which can lead to cracking under vibration.
Stop 5: Sealant for liquid-cooled connectors

This image was generated by AI; the final focus is on the liquid cooling system. Sealants have been applied to the connectors and the edges of the cooling plates. Since liquid cooling has become widespread, sealing applications have increased manifold. Sealants must be coolant-resistant, have low volatility, and remain crack-free over long periods. Silicone sealants are the primary choice; German manufacturers such as Wacker have deep expertise in silicone chemistry, while Henkel and Dow Chemical Company also frequently use them. PCB protection also includes three-proof coating resins for moisture, mold, and salt spray, which constitute a distinct category. Recommendation 5 for system disassembly: For liquid-cooling sealants, coolant resistance is the minimum requirement; low volatility is a bonus feature—do not skimp on this.
Once the dismantling is complete, let’s say three honest things.
First, the choice of adhesive for server heat dissipation depends on the application scenario. For thermal interface and sealing, silicone is preferred; for structural load-bearing applications, epoxy is preferred; and for thermal paste/gel, the specific operating conditions should be considered. There is no “universal adhesive” —only the right adhesive for the job. Second, this market is highly concentrated: the high-end TIM market is dominated by seven or eight major international manufacturers, which collectively hold over 90% of the market share; Shin-Etsu, Taoxi, Honeywell, Henkel, Laird, and Parker Hannifin each hold a dominant position. Huitian, Debang, and Shanghai Jome (JOME)—these domestic manufacturers have gradually closed the performance gap in thermal paste, potting compounds, and gels over the past few years; what they lack are long-term validation data and access to the supply chains of major global manufacturers.。Third, the most straightforward approach is to find a supplier capable of covering all application scenarios—silicone grease, gel, potting compound, structural adhesive, and sealant. Having five or six types of adhesives in a single machine and coordinating with five or six different suppliers means that just the verification and traceability processes alone can be utterly exhausting.
Frequently Asked Engineering Questions
When should AI server thermal engineers specify dispensable thermal gel over silicone thermal grease?
Use thermal conductive silicone grease such as JOMG 2000 on machined GPU or CPU cold plates where clamping pressure maintains ultra-thin bond-line thickness, and specify dispensable 1K or 2K thermal conductive silicone gel such as TCMP 140# (14 W/m-K) or JOMG 1980 (8.0 W/m-K) across multi-height VRMs, inductors, and optical transceivers where gap tolerances vary from 0.2 mm to 3.0 mm.
Why does low volatility matter for thermal interface materials inside high-density data center racks?
High-power AI accelerator boards operate continuously under elevated junction temperatures; low-volatility platinum-cured thermal gels and low-bleed silicone greases minimize silicone oil migration and contact contamination on adjacent high-speed connectors and optical lenses.
Does Shanghai Jome Industrial Co., Ltd. provide CTI RoHS 2.0 reports and evaluation samples for server TIM qualification?
Yes. JOME thermal greases, 2.0 to 14.0 W/m-K thermal gels, and die-cut thermal pads are manufactured under ISO 9001:2015 and ISO 14001:2015 with 11 verifiable CTI RoHS 2.0 (EU 2015/863) reports, and free trial samples are shipped worldwide via UPS freight collect.
