Anaerobic metal pipe thread sealant
JOM 567 is designed for the locking and sealing of metal tapered threads and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.
product details
JOM 567 Anaerobic metal pipe thread sealant
PRODUCT DESCRIPTION
JOM 567 provides the following product characteristics:
| Technology | Acrylic |
| Chemical Type | Methacrylate ester |
| Appearance (uncured) | Smooth, creamy, off-white pasteLMS |
| Components | One component – requires no mixing |
| Viscosity | High |
| Cure | Anaerobic |
| Secondary Cure | Activator |
| Application | Thread sealing |
| Strength | Low |
JOM 567 is designed for the locking and sealing of metal tapered threads and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The high lubricating properties of this compound prevent galling on stainless steel, aluminum and all other metal pipe threads and fittings. JOM 567is recommended for industrial applications in the chemical processing, petroleum refining, pulp/paper, waste treatment, textile, utilities/power generation, marine, automotive, industrial equipment, gas compression and distribution industries. It is also recommended for industrial plant fluid power systems.
JOM 567 Fire hazard is small. No flash point in liquid state. Ignition temperature 455 °C. For use in devices handling gasoline, petroleum oils, natural gas (pressure not over 300 PSIG), propane, and butane, not exceeding 2 in. pipe size.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.1
Flash Point – See MSDS
Viscosity, Brookfield – RVF, 25 °C, mPa·s (cP):
Spindle 7, speed 2 rpm 280,000 -800,000
TYPICAL CURING PERFORMANCE
Cure Speed vs. Substrate
The rate of cure will depend on the substrate used. The graph below shows the breakaway strength developed with time on 3/8 NPT steel pipe tees and plugs compared to different materials and tested according to ASTM D6396.
Cure Speed vs. Activator
Where cure speed is unacceptably long, or large gaps are present, applying activator to the surface will improve cure speed. The graph below shows the breakaway strength developed with time on 3/8 NPT steel pipe tees and plugs using JOM 7471 and JOM 7649 and tested according to ASTM D6396.
Presentation
Bottles： 50ml, 250ml
For Immediate Assistance, Please Contact us Now!
Contact Us
- 24-hour online service
- Own factory processing
