204 Microcapsule pre-coated threaded locking adhesive

JOM204 Microcapsule pre-coated threaded locking adhesive

Product Description:

JOM204 is a pink cream-colored paste, a two-component high-strength anaerobic-curing thread locking agent. The process involves pre-coating the threads with an adhesive solution containing activator (Component B), then baking it in a drying oven at 70°C for 30-60 minutes to form a dry adhesive coating. During assembly, crushing the capsules triggers a chemical reaction that generates locking strength. This eliminates the need for adhesives or gluing equipment on the production line, significantly improving efficiency.

Typical uses:

It can be applied to bolts and pipe joints.

State before curing:

Performance after curing:

(M10 steel nuts and bolts cured at 22℃ for 24 hours)

Usage:

Clean the thread surface with JOM7755 cleaner and dry it.Mixing: Add JOM204 activator (Component B) to JOM204 (Component A) at a ratio of 28:1, mixing thoroughly without excessive force to prevent disruption of the active ingredients, which could cause spontaneous curing or reduced locking performance.Drying: the workpiece after glue coating is dried at 70-90℃ for 25-60 minutes, the time is extended or shortened appropriately according to the size of the workpiece.Validity period: generally only for the same day. If not used up on the same day, it can be stored in cold storage. The adjusted glue should be used up within 5 days.

Storage conditions:

This product should be stored in a dry, cool and ventilated place.

To avoid contamination of unused adhesive, do not pour the adhesive back into the original packaging container.

Keep away from children.

Packaging specifications：

500g/group