Threaded fastening adhesive prevents bolt loosening and leakage caused by impact and vibration

Product Description

JOM 262 is a high strength, anaerobic thread locking compound.   JOM 262 is designed for the permanent  locking  of threaded  fasteners. The product performs on aluminum, steel, plated fasteners,  stainless  steel,  and  special  alloy  parts.  JOM 262 exhibits good temperature stability and is solvent resistant.

Typical Applications

JOM 262  will  lock  and  seal  large  fasteners.

JOM 262 is used in applications where shock and vibration may cause the fastener to loosen.

Properties of Uncured Material

Typical Curing Performance

Cure Speed

The  cure  speed  is  depended  on  temperature  and substrate.    The  graph below  shows  the  Breakaway Strength  on

M-10  Steel,  Phosphate/oil,  and  Zinc finishes.

Performance of Cured Material

Typical Values

Fixture Time

Full Cure Time

Temperature Range

Breakaway Strength

3/8” Plain Steel nut and bolt @24 hr

3/8” Zinc plate nut and bolt@ 24 hr

Environmental and Fluid Resistance (Shear strength values after 1000 hrs)

Typical Values

Heat age                                                    100%

Engine oil@ 150oC                                    80%

Brake fluid @ 150oC                                 100%

ATF       @ 150oC                                     100%

50/50 water/

ethylene glycol @ 120oC                         85%

Water     @ 100oC                                      85%

Gasoline @ 25oC                                     100%

Diesel fuel @ 25oC                                  100%

Ethyl Alcohol @25oC                               95%

Instructions for Use

Ensure  parts  are  clean,  dry  and  free  from  oil  and grease.

Compatible Primers

Primers such as JOM 7649 (Primer N) or JOM 7641 (Primer T) can be used to speed the fixture time of

the adhesive. Fixture times can improve by as much as 50%. The use of primers can result in lower

strength and performance should be tested after full cure.

Presentation

Bottles……2ml, 10ml, 50ml, 250ml and liter