UV Curable Adhesive & Light Cure Adhesive

Special photohardening resin for optical positioning and reading head

Product profile

JM 352 light hardening resin, curing process has a low shrinkage rate, resin light hardening process does not produce displacement phenomenon, especially used in iron, aluminum… and other metal materials and glass then fixed. This product belongs to the high viscosity is not vertical flow of shaking colloid has the characteristics of low shrinkage rate, is very suitable for reading and writing precision optical parts of the point glue fixation, hardening process gas volatilization is very low, does not pollute the product parts.

Product features

1.This product has shake degeneration, UV curing toughness, shock resistance and shock resistance.

2.This resin has a good following strength for the following and fixing between glass, plastic and metal.

3.This product complies with the 2021 / 65 / EU RoHS regulations.

Resin specifications

Sclerosis conditions

Recommended irradiation wavelength nm     365~405

The irradiation intensity of mW / cm2> 50  was recommended

Recommended irradiation energy mJ / cm2      1,500~3,000

usage method

1.Clean up the grease, dust and other substances on the surface of the substrate before use. When cleaning the plastic surface, you can use a rag or a cloth with solvent to wipe clean. For the metal with the primer cover or surface treatment, the surface can be cleaned with solvent first.

2.The hardening time of the actual items will be affected by the following factors: ① the geometry of the object, the material characteristics of the ② object, the thickness of the ③ subsequent agent, and the performance of the ④ UV lamp source. The hardening conditions need to be finally confirmed by the actual goods and conditions.

3.Regularly measure the intensity and illumination of the UV lamp tube. Excessive exposure has little impact on the properties of UV glue, and underexposure has a great impact on the properties of UV glue, which may cause the low reaction rate of colloid and the decline of the life span of ring measurement.

4.People with allergic constitution, direct skin contact may cause allergic symptoms to this product.

Finished product nature

Storage environment

This product should be stored in a cool place to avoid contact with sunlight or UV light. The operator had better be able to cover the lid as soon as possible to eliminate any light. Store at room temperature (14 ~ 34 ℃) for half a year.

Disposal principle

This product does not contain carcinogens, but the surface contact may cause temporary skin redness, so the contaminated area should be cleaned with soapy water. Swallow this product is still toxic to human body. Once eaten, vomiting and hospital should be implemented immediately for diagnosis and treatment. If the user accidentally touches his eyes, he should immediately wash the eyes with a lot of water for at least 15 minutes before being sent to the hospital for treatment. For further attention, please see the Material Safety Data Sheet.

Packaging specifications：

30ml/PCS、50ml/PCS、1kg/Barrel.