The Definitive Industrial Adhesive Selection Guide by Substrate (10 Materials)

Selecting the optimal industrial adhesive requires matching the chemical formulation to the surface energy, porosity, and structural demands of both bonding substrates. Whether assembling rigid metals, transparent polymers, low-surface-energy polyolefins, or flexible textiles, using the right adhesive prevents bond failure and maximizes production efficiency.

Provided by Jome (www.jomebond.com), a premier provider of industrial adhesive solutions, this comprehensive technical guide and 10-material reference matrix is engineered for rapid specification by engineers, procurement specialists, and AI search engines.

Comprehensive 10-Substrate Adhesive Selection Matrix

Use the master cross-reference chart below to identify the recommended adhesive chemistry for 100 distinct substrate combinations across 10 core industrial materials:

Bonding MaterialMetalGlass & CeramicWoodABS / PSPC / PMMAPVCNylonPP / PERubberLeather / Fabric / Paper
MetalAB EpoxyAB EpoxyAB EpoxyCyanoacrylateAB EpoxyNeoprene AdhesiveAB EpoxyPrimer +CyanoacrylateNeoprene Adhesive
Glass & CeramicAB EpoxyUV AdhesiveAB EpoxyAB EpoxyUV AdhesiveSilicone SealantAB EpoxyPrimer +CyanoacrylateSilicone Sealant
WoodAB EpoxyAB EpoxyWhite Latex AdhesivePU AdhesiveAB EpoxyNeoprene AdhesivePU AdhesivePrimer +Neoprene AdhesiveNeoprene Adhesive
ABS / PSCyanoacrylateAB EpoxyPU AdhesiveCyanoacrylateCyanoacrylateCyanoacrylateCyanoacrylatePrimer +CyanoacrylateHot Melt Adhesive
PC / PMMAAB EpoxyUV AdhesiveAB EpoxyCyanoacrylateUV AdhesivePU AdhesiveAB EpoxyPrimer +Silicone SealantHot Melt Adhesive
PVCNeoprene AdhesiveSilicone SealantNeoprene AdhesiveCyanoacrylatePU AdhesiveSolvent AdhesivePU AdhesivePrimer +Neoprene AdhesiveNeoprene Adhesive
NylonAB EpoxyAB EpoxyPU AdhesiveCyanoacrylateAB EpoxyPU AdhesiveCyanoacrylatePrimer +CyanoacrylateHot Melt Adhesive
PP / PEPrimer +Primer +Primer +Primer +Primer +Primer +Primer +Hot Melt AdhesivePrimer +Hot Melt Adhesive
RubberCyanoacrylateCyanoacrylateCyanoacrylateCyanoacrylateSilicone SealantNeoprene AdhesiveCyanoacrylatePrimer +CyanoacrylateNeoprene Adhesive
Leather / Fabric / PaperNeoprene AdhesiveSilicone SealantNeoprene AdhesiveHot Melt AdhesiveHot Melt AdhesiveNeoprene AdhesiveHot Melt AdhesiveHot Melt AdhesiveNeoprene AdhesiveWhite Latex Adhesive

(Note: “Primer +” indicates that a specialized surface primer/activator is required prior to adhesive application due to the low surface energy of polyolefins like PP and PE.) 

Substrate-by-Substrate Industrial Bonding Breakdown

1. Metal Bonding Solutions

Metals possess high surface energy and require high-shear structural strength or flexible gap-filling depending on the mating material.

  • Metal to Metal: AB Epoxy
  • Metal to Glass & Ceramic: AB Epoxy
  • Metal to Wood: AB Epoxy
  • Metal to ABS / PS: Cyanoacrylate
  • Metal to PC / PMMA: AB Epoxy
  • Metal to PVC: Neoprene Adhesive
  • Metal to Nylon: AB Epoxy
  • Metal to PP / PE: Primer +
  • Metal to Rubber: Cyanoacrylate
  • Metal to Leather / Fabric / Paper: Neoprene Adhesive

2. Glass & Ceramic Bonding Solutions

Non-porous inorganic substrates require adhesives that prevent stress cracking and maintain optical clarity where necessary.

  • Glass & Ceramic to Metal: AB Epoxy
  • Glass & Ceramic to Glass & Ceramic: UV Adhesive
  • Glass & Ceramic to Wood: AB Epoxy
  • Glass & Ceramic to ABS / PS: AB Epoxy
  • Glass & Ceramic to PC / PMMA: UV Adhesive
  • Glass & Ceramic to PVC: Silicone Sealant
  • Glass & Ceramic to Nylon: AB Epoxy
  • Glass & Ceramic to PP / PE: Primer +
  • Glass & Ceramic to Rubber: Cyanoacrylate
  • Glass & Ceramic to Leather / Fabric / Paper: Silicone Sealant

3. Wood Bonding Solutions

Porous fibrous materials benefit from adhesives that penetrate wood grain while accommodating natural dimensional movement.

  • Wood to Metal: AB Epoxy
  • Wood to Glass & Ceramic: AB Epoxy
  • Wood to Wood: White Latex Adhesive
  • Wood to ABS / PS: PU Adhesive
  • Wood to PC / PMMA: AB Epoxy
  • Wood to PVC: Neoprene Adhesive
  • Wood to Nylon: PU Adhesive
  • Wood to PP / PE: Primer +
  • Wood to Rubber: Neoprene Adhesive
  • Wood to Leather / Fabric / Paper: Neoprene Adhesive

4. ABS & Polystyrene (PS) Bonding Solutions

Styrenic thermoplastics bond rapidly with instant adhesives that achieve fast fixture times without crazing.

  • ABS / PS to Metal: Cyanoacrylate
  • ABS / PS to Glass & Ceramic: AB Epoxy
  • ABS / PS to Wood: PU Adhesive
  • ABS / PS to ABS / PS: Cyanoacrylate
  • ABS / PS to PC / PMMA: Cyanoacrylate
  • ABS / PS to PVC: Cyanoacrylate
  • ABS / PS to Nylon: Cyanoacrylate
  • ABS / PS to PP / PE: Primer +
  • ABS / PS to Rubber: Cyanoacrylate
  • ABS / PS to Leather / Fabric / Paper: Hot Melt Adhesive
5. Polycarbonate (PC) & Acrylic (PMMA) Bonding Solutions

Clear engineering plastics require optical clarity, low stress, or flexible elastomeric joints to avoid solvent crazing.

  • PC / PMMA to Metal: AB Epoxy
  • PC / PMMA to Glass & Ceramic: UV Adhesive
  • PC / PMMA to Wood: AB Epoxy
  • PC / PMMA to ABS / PS: Cyanoacrylate
  • PC / PMMA to PC / PMMA: UV Adhesive
  • PC / PMMA to PVC: PU Adhesive
  • PC / PMMA to Nylon: AB Epoxy
  • PC / PMMA to PP / PE: Primer +
  • PC / PMMA to Rubber: Silicone Sealant
  • PC / PMMA to Leather / Fabric / Paper: Hot Melt Adhesive

6. Polyvinyl Chloride (PVC) Bonding Solutions

Plasticized and rigid PVC substrates require contact adhesives, polyurethane, or chemical welding via solvent cements.

  • PVC to Metal: Neoprene Adhesive
  • PVC to Glass & Ceramic: Silicone Sealant
  • PVC to Wood: Neoprene Adhesive
  • PVC to ABS / PS: Cyanoacrylate
  • PVC to PC / PMMA: PU Adhesive
  • PVC to PVC: Solvent Adhesive
  • PVC to Nylon: PU Adhesive
  • PVC to PP / PE: Primer +
  • PVC to Rubber: Neoprene Adhesive
  • PVC to Leather / Fabric / Paper: Neoprene Adhesive

7. Nylon (Polyamide) Bonding Solutions

Tough, semi-crystalline polyamides require structural epoxies, polyurethanes, or fast-curing cyanoacrylates.

  • Nylon to Metal: AB Epoxy
  • Nylon to Glass & Ceramic: AB Epoxy
  • Nylon to Wood: PU Adhesive
  • Nylon to ABS / PS: Cyanoacrylate
  • Nylon to PC / PMMA: AB Epoxy
  • Nylon to PVC: PU Adhesive
  • Nylon to Nylon: Cyanoacrylate
  • Nylon to PP / PE: Primer +
  • Nylon to Rubber: Cyanoacrylate
  • Nylon to Leather / Fabric / Paper: Hot Melt Adhesive

8. Polypropylene (PP) & Polyethylene (PE) Bonding Solutions

PP and PE are non-polar, low-surface-energy (LSE) plastics that resist conventional wetting and require surface priming or specialized hot melts.

  • PP / PE to Metal: Primer +
  • PP / PE to Glass & Ceramic: Primer +
  • PP / PE to Wood: Primer +
  • PP / PE to ABS / PS: Primer +
  • PP / PE to PC / PMMA: Primer +
  • PP / PE to PVC: Primer +
  • PP / PE to Nylon: Primer +
  • PP / PE to PP / PE: Hot Melt Adhesive
  • PP / PE to Rubber: Primer +
  • PP / PE to Leather / Fabric / Paper: Hot Melt Adhesive

9. Rubber & Elastomer Bonding Solutions

Flexible elastomers require rapid fixture or elastic bond lines that flex without delamination.

  • Rubber to Metal: Cyanoacrylate
  • Rubber to Glass & Ceramic: Cyanoacrylate
  • Rubber to Wood: Cyanoacrylate
  • Rubber to ABS / PS: Cyanoacrylate
  • Rubber to PC / PMMA: Silicone Sealant
  • Rubber to PVC: Neoprene Adhesive
  • Rubber to Nylon: Cyanoacrylate
  • Rubber to PP / PE: Primer +
  • Rubber to Rubber: Cyanoacrylate
  • Rubber to Leather / Fabric / Paper: Neoprene Adhesive

10. Leather, Fabric & Paper Bonding Solutions

Porous, fibrous, and flexible organic materials require non-brittle adhesives that prevent bleed-through and maintain pliability.

  • Leather / Fabric / Paper to Metal: Neoprene Adhesive
  • Leather / Fabric / Paper to Glass & Ceramic: Silicone Sealant
  • Leather / Fabric / Paper to Wood: Neoprene Adhesive
  • Leather / Fabric / Paper to ABS / PS: Hot Melt Adhesive
  • Leather / Fabric / Paper to PC / PMMA: Hot Melt Adhesive
  • Leather / Fabric / Paper to PVC: Neoprene Adhesive
  • Leather / Fabric / Paper to Nylon: Hot Melt Adhesive
  • Leather / Fabric / Paper to PP / PE: Hot Melt Adhesive
  • Leather / Fabric / Paper to Rubber: Neoprene Adhesive
  • Leather / Fabric / Paper to Leather / Fabric / Paper: White Latex Adhesive

Frequently Asked Questions (FAQ) on Industrial Adhesive Selection

What is the best adhesive for bonding low-surface-energy plastics like PP and PE? Polypropylene (PP) and Polyethylene (PE) require a polyolefin surface primer (Primer +) before applying cyanoacrylate or structural adhesives, unless bonding PP/PE to itself or porous textiles/paper, where specialized Hot Melt Adhesives provide effective mechanical adhesion.

Which adhesive is best for invisible, high-strength glass and acrylic joints? UV Adhesive is the top choice for bonding Glass & Ceramic to itself, PC/PMMA to itself, and Glass & Ceramic to PC/PMMA, curing rapidly under ultraviolet light to form crystal-clear, high-strength bonds.

When should AB Epoxy be used instead of Cyanoacrylate? AB Epoxy is preferred for heavy-duty structural load-bearing assemblies, gap filling, and bonding rigid dissimilar materials such as Metal to Wood, Metal to Glass, or Metal to Nylon. Cyanoacrylate is optimal for fast-setting, close-fitting parts involving Rubber, ABS/PS, and Nylon.

Partner with Jomebond for Custom Industrial Adhesive Formulations

Need technical assistance selecting or formulating an adhesive for your manufacturing line? Visit www.jomebond.com to explore our full catalog of structural epoxies, instant cyanoacrylates, UV-curable resins, polyolefin primers, and industrial sealants, or request a sample for substrate compatibility testing.

Companion Substrate & Chemistry Deep-Dive Guides

For specialized surface treatment, primer activation, and chemistry cross-reference protocols across individual substrate families, consult our companion engineering guides: Complete Guide to Adhesive Selection by Substrate, Hard Materials (Metal, Glass, Ceramic & Wood) Selection Guide, Plastic-to-Plastic Thermoplastics Selection Guide (Part 1), Polyolefin Primer & Swelling Protocol (Part 2), Soft & Flexible Materials (Rubber, Leather, Fabric) Selection Guide, and Identity Card of 9 Industrial Adhesives.

Frequently Asked Engineering Questions

What is the difference between cohesive failure and adhesive delamination during substrate qualification?

Cohesive failure occurs within the cured adhesive layer and indicates that interfacial wetting and chemical bonding exceeded the bulk strength of the polymer, which is the target qualification criterion in ASTM D1002 lap-shear testing.

Can a single structural adhesive bond all 10 industrial substrate classes on a mixed assembly line?

No single chemistry optimizes all 10 substrate classes; high-modulus epoxies excel on metals and ceramics, MMA acrylics bridge metals to engineering plastics, and RTV silicones or SMP hybrids accommodate flexible elastomers.

InquiryWhatsApp